Using your tool, insert it into the small hole and press down the reset button for 3-5 seconds. Connect the controller to the PS4 via USB cable. Then plug in the console again and turn it back on. Press the PlayStation button on your controller. The light bar should turn blue, indicating it has paired to the PS4. 2] Configure Steam Big Picture settings. Steam may have trouble recognizing your game controller if you don’t enable the required settings; especially if you’re using a controller other than After switching your controller into Bluetooth mode, press and hold the “Y + Stadia” buttons for 2 seconds to enter pairing mode. The status light will flash orange. Then, go to the device you want to play on and pair your controller in the settings. Once paired and connected, the status light on the controller will turn solid white. Congrats!

Discharge the PS4’s battery by pushing the power button on the console. Connect the controller to the console with a USB cord. Turn on the PS4 and press any of the controller’s buttons. Now, it should be possible for the PS4 system to detect the controller and that the PS4 controller white light issue is gone.

and then edit your program with Ps4.begin("PS4 MAC Addr after set with SixPair"); (lower case 's') after ESP32 reset, and program running, press Home button only on PS4 controller. have nice pair, ok ^_^
DualShock 4 suddenly turns off after connecting to iPhone. So, iOS 13 now has support for PS4 and Xbox controllers, and I just bought a DualShock 4 to play Apple Arcade games with it. I've pressed the Share and the PlayStation button at the same time for 5 seconds, and the controller entered pair mode. It appeared on the list of available
yO9V.
  • u8amfotenz.pages.dev/130
  • u8amfotenz.pages.dev/208
  • u8amfotenz.pages.dev/305
  • u8amfotenz.pages.dev/289
  • u8amfotenz.pages.dev/84
  • u8amfotenz.pages.dev/161
  • u8amfotenz.pages.dev/270
  • u8amfotenz.pages.dev/197
  • u8amfotenz.pages.dev/129

    • can t connect ps4 controller after reset